ReferenceTypeRef

object

Reference type, identified by id. Ids are fixed and stable across all environments.

* Additional properties are NOT allowed.
idstringrequired

1 = EEA, 2 = Non-EEA, 3 = Both.

Allowed values:123

Example:1

Example

Section

object

A single section within a quote submission. The front end sends at most two section objects: one for the main Agency policy (MSSL/MAIS etc.), and one for the Mosaic Asta Europe (MAE) policy when the risk has an EEA component. Each section carries a division.id that identifies which agency line it belongs to. Trident uses this to determine which syndicate lines (1609/2610 for the agency section; 5399/5431 for the MAE section).

divisionobjectrequired

Required. Agency division this section belongs to — id only. Must match the division.id supplied in the corresponding lines[] entry. Trident uses this to identify: (a) which XFI agency line to associate the section with, and (b) which syndicate lines to include (agency div → 1609+2610; MAE div 7 → 5399+5431).

* Additional properties are NOT allowed.
Show Child Parameters
descriptionstring

Section label (e.g. ‘Cyber Liability - Primary Layer’). Use a descriptive name that identifies the layer type and coverage for internal reference.

Example:Cyber Liability - Primary Layer

gELRnumber(double)required

Required. gELR (gross expected loss ratio) at section level (numeric, e.g. 50). Source: quote/bind documentation.

Example:50

typeOfLayerobjectrequired

Required. Type of layer — id only. Select ‘Primary’ if Mosaic takes the first layer in the tower; select ‘1st Excess’ or higher for layers further up the tower. Default to ‘Primary’ if not specified by the underwriter. Source: quote email or documentation.

* Additional properties are NOT allowed.
Show Child Parameters
solvencyIIClassobjectrequired

Required. Solvency II class — id only. For CY LOB, select ‘EP - Direct-General Liability’. Enter the risk code applicable for the class of business.

* Additional properties are NOT allowed.
Show Child Parameters
typeOfLimitBasisobjectrequired

Required. Type of limit basis — id only. Source: quote email or documentation. Default to ‘In the Aggregate’ if not specified. Determines the basis and frequency at which the limit can be applied.

* Additional properties are NOT allowed.
Show Child Parameters
excessnumber(double)required

Required. Excess / attachment point for this section (numeric). Set to 0 for the Primary layer. Set to the attachment point value for Excess layers.

100%Limitnumber(double)required

Required. 100% limit for this section (numeric, gross pre-line). Source: quote documentation.

Example:1000000

aggregateLimitnumber(double)

Optional. Aggregate limit for this section (numeric, gross pre-line).

Example:1000000

agreementobjectrequired

Required. Agreement reference for this section. Identifies the binding authority agreement under which this section is written.

Show Child Parameters
coveragearray[object]required

Coverage line within a quote section.

Show Child Parameters
deductionarray[object]

Deduction (brokerage / commission) or tax deduction line within a quote section.

For tax deductions (deduction code TAXIDIR, TAXIRID, or TAXIRIR), populate the additional tax fields: amountOfPremium, typeOfTax, country, contactCreation. Record one entry per country in the tax schedule, including countries with 0% tax (use a Non-taxable entry).

Show Child Parameters
deductibleobject

Deductible details for this section.

Show Child Parameters
conditionsarray[object]

Clause / condition attached to a quote section.

Show Child Parameters
reinstatementsobject

Reinstatement config.

Show Child Parameters
regulatoryCodingarray[object]required

Regulatory coding (code split) line within a quote section.

Show Child Parameters
marketSplitarray[object]

A single carrier entry in a section-level market split.

Show Child Parameters
classobject

Bind-time. Section class — code only. Excess Casualty: XSC when policy reference suffix is AA; XCP (Punitive Damages) when suffix is AU.

* Additional properties are NOT allowed.
Show Child Parameters
riskAdjustedRateChangenumber(double)

Bind-time. Required for renewal policies. Risk Adjusted Rate Change percentage. Must not be 0% for renewals — query the underwriter if not provided. Source: quote/bind documentation.

Example:5

instalmentbasisobject

Optional. Instalment basis — id only (e.g. Annual, Quarterly, Monthly, Custom). Source: Premium Payment Terms section of the declaration slip. When set to Custom, also supply customInstalments, instalmentCount, and instalmentPlan.

* Additional properties are NOT allowed.
Show Child Parameters
customInstalmentsboolean

Optional. Set true for a custom (non-standard) instalment schedule. Depends on instalmentbasis — set true when instalmentbasis is Custom. When true: populate instalmentCount and instalmentPlan; set overrideToSingle to false.

overrideToSingleboolean

Bind-time. Override to a single instalment. Mutually exclusive with customInstalments — must be false when customInstalments is true.

instalmentCountinteger(int32)

Optional. Number of custom instalments. Depends on instalmentbasis — required when customInstalments is true (i.e. when instalmentbasis is Custom).

Example:4

paymentDaysinteger(int32)required

Required. Payment days from inception (typically 30 or 60 for MSSL).

Example:30

instalmentPlanarray[object]

A single entry in a custom instalment plan.

Show Child Parameters
Example

Line

object

A single agency policy line within a quote submission. Supply one element per underwriting agency line (one for the main Agency line; an additional one for the Mosaic Asta Europe agency line when the risk has an EEA component).

Front end supplies agency-line data only. Trident retrieves all XFI-created lines (agency + syndicate) via Get All Lines, identifies each by Division ID (Agency = front-end division.id; MAE = 7; 1609 = 3; 2610 = 12; 5399 = 6; 5431 = 13), and propagates most agency-line values to the syndicate lines (“Same as Agency Line”). Derived-only fields (originatingDivision, originatingOffice, global-risk cross-reference, inclusive-line) are computed by Trident and are not part of this payload.

Fields are grouped by stage: Submission → Quote → FON → Bind.

underWriterobject

Submission. Required. Underwriter with authority to write the risk — id only. Provided per agency line. Trident copies this to the syndicate lines. Source: underwriter’s email/document.

* Additional properties are NOT allowed.
Show Child Parameters
typeOfBillingobject

Submission. Required. Type of billing — id only (default ‘Producer billed’). Trident copies to syndicate lines.

* Additional properties are NOT allowed.
Show Child Parameters
divisionobject

Submission. Required. Agency division — id only. Identifies the Mosaic entity binding this agency line (e.g. MSSL, MAIS; MAE = 7). Trident matches this against XFI Get All Lines to locate the agency line. Do NOT confuse with the top-level shell division.

* Additional properties are NOT allowed.
Show Child Parameters
writtenLinenumber(double)

Submission. Required. Written line percentage for this agency line (a.k.a. Agency Share %). Default 100 if not supplied. XFI auto-generates actualWrittenLine% from this. Trident copies to syndicate lines.

Example:100

producingCompanyobject

Submission. Conditional. Producing company — id only. Required when division = Mosaic Asta Europe (7); set to the relevant Non-EEA agency division (e.g. MSSL, MAIS).

* Additional properties are NOT allowed.
Show Child Parameters
sBFClassobject

Submission. SBF (Syndicate Business Forecast) class — id only (default Cyber). Provided per agency line; Trident copies to syndicate lines.

* Additional properties are NOT allowed.
Show Child Parameters
producingUnderwriterobject

Quote. Producing underwriter for this line — id only. The underwriter who produced this line. Confirmed at bind by the stamp on the slip.

* Additional properties are NOT allowed.
Show Child Parameters
ourRoleobject

Quote. Required. Our role in the placement — id only. MAIS and Canada entities default to ‘Sole Lead’.

* Additional properties are NOT allowed.
Show Child Parameters
signedLinePercentagenumber(double)

Quote. Required. Signed line percentage for this line. At quote, signed line equals written line; at bind it may be reduced (never exceeds written line). Note: for PV MAIS, Excess Casualty and Energy Liability, Syndicate 2610/5431 written & signed line are always 0%.

Example:100

lloydsPlatformobject

Quote. Lloyd’s platform — id only. Set for MAE (Lloyd’s Brussels) and Singapore (Lloyd’s Asia) divisions; otherwise leave blank. Provided per agency line.

* Additional properties are NOT allowed.
Show Child Parameters
bureauLeadobject

Quote. Bureau lead — id only. E.g. ‘PV Portal’ for PV MAIS; otherwise usually blank. Provided per agency line (moved from UW Defaults).

* Additional properties are NOT allowed.
Show Child Parameters
isThirdPartyCapacityDeployedboolean

Quote. Third-party capacity deployed — default true (most Mosaic risks are routed through SCM). Agency/MAE lines: always checked. Trident leaves this BLANK on syndicate lines (1609/2610/5399/5431).

Example:true

syndicateCapitalManagementobject

Quote. Conditional. SCM broker partner — id only. Required when isThirdPartyCapacityDeployed = true. Default ‘Acrisure’ at quote; updated at bind per the SCM tracker. Trident leaves this BLANK on syndicate lines.

* Additional properties are NOT allowed.
Show Child Parameters
leadingInsurerobject

Quote/Bind. Conditional. Leading insurer — id only. Required when the slip leader is non-Lloyd’s. Source: Subscription Agreement section of the slip.

* Additional properties are NOT allowed.
Show Child Parameters
brokerOrderPercentnumber(double)

FON. Broker order percentage. Auto-calculated when written line and order are entered; updated on bind.

Example:50

signedOrderPercentnumber(double)

FON. Signed order percentage (SOP: always 100%). Kept in the API for simplicity.

Example:100

claimsAgreementPartyboolean

Bind. Required. Whether Mosaic is the claims agreement party. Set true when Mosaic is sole/bureau lead or a claims agreement party. Set false otherwise. 2610/5431 lines are always false. Source: Claims Agreement Party section of the slip.

Example:true

defenseCostsCoveredobject

Bind. Defense costs covered — id only. Required for PL LOB (processed per the Defense Cost section). Provided per agency line.

* Additional properties are NOT allowed.
Show Child Parameters
leaderPercentnumber(double)

Bind. Required when the slip leader is non-Lloyd’s. Leader percentage. Source: Subscription Agreement section of the slip.

Example:25

leaderReferencestring

Bind. Leader reference. Populated when the slip leader is non-Lloyd’s. Source: Subscription Agreement section of the slip.

Example:LDR-2026-001

actualDateWrittenstring(date)

Bind. Required. Date the underwriter agreed/stamped the slip. Found with the stamp on the slip.

Example:2026-07-01

dateSignedstring(date)

Bind. Required. Signed date as stamped on the slip. Trident copies to syndicate lines.

Example:2026-07-01

policyLineReferenceOverridestring

Bind. Required. Base syndicate policy line reference (a.k.a. Reference Override) supplied by the front end. Trident derives the agency and parallel-syndicate references from this: agency lines increment the trailing alphabetic character (…AA → AB); parallel syndicate lines (2610/5431) replace the trailing character with an incrementing numeral (…AA → A1).

Example:PWT3876925AA

Example

InsuredEnrichment

object

Bind-time insured enrichment fields (Step 4 only). Carries the additional insured attributes entered in XFI at bind — occupation, LOB-specific details, issuance address, policyholder type, and tax identification numbers. The core contact fields (companyName, domicile, mailing address) are already on the draft from Step 1 and do not need to be re-sent.

occupationSourceobjectrequired

Required. Occupation source — id only. Identifies the source system used for the occupation lookup (e.g. D&B). Source: XFI Contact (General) > Insured section.

* Additional properties are NOT allowed.
Show Child Parameters
occupationobjectrequired

Required. Insured occupation — code only. Enter as sourced from D&B lookup or submission documentation.

* Additional properties are NOT allowed.
Show Child Parameters
assetsUnderManagementstring

Required for FI LOB. Assets under management (string). Source: booking sheet or Tyche rater.

Example:500000000

assetSizestring

Required for FI LOB. Asset size (string). Source: booking sheet or Tyche rater.

Example:1000000000

webSitestring

Required for CY LOB. Insured website URL. Source: submission documentation or insured.

Example:https://www.veritascap.com

policyholderTypeobject

Policyholder type — id only. Source: fiscal/regulatory section of the slip.

* Additional properties are NOT allowed.
Show Child Parameters
issuanceAddressSameAsInsuredboolean

Set true to copy the insured address to the issuance address (Direct business). Set false and supply issuanceTo, issuanceAddress1, issuanceCity, etc. for Assumed / RI business.

Example:true

issuanceTostring

Conditional. Reassured name on the issuance address — populate when issuanceAddressSameAsInsured is false.

Example:Munich Re

issuanceAddress1string

Conditional. Issuance address line 1 — populate when issuanceAddressSameAsInsured is false.

Example:Koeniginstrasse 107

issuanceAddress2string

Conditional. Issuance address line 2 — populate when issuanceAddressSameAsInsured is false.

Example:PO Box 123

issuanceCitystring

Conditional. Issuance address city — populate when issuanceAddressSameAsInsured is false.

Example:Munich

issuanceStateobject

Conditional. Issuance address state — id only. Populate when issuanceAddressSameAsInsured is false.

* Additional properties are NOT allowed.
Show Child Parameters
issuancePostCodestring

Conditional. Issuance address post code — populate when issuanceAddressSameAsInsured is false.

Example:80802

issuanceDateReviewedstring(date)

Conditional. Date the issuance address was reviewed — populate when issuanceAddressSameAsInsured is false.

Example:2026-07-01

mailingAddress2string

Second mailing address line.

Example:Suite 400

mailingAddressCountryobjectrequired

Required. Insured mailing address country — code only. Also mandatory for BDX reporting when insured has exposure in Spain, Portugal, Italy, or Canada.

* Additional properties are NOT allowed.
Show Child Parameters
mailingAddressStateobject

Required for US and Canada insureds. Mailing address state — code only.

* Additional properties are NOT allowed.
Show Child Parameters
mailingAddressPostCodestring

Insured mailing address post code / zip. Supply for US insureds and any other country where postal codes apply.

Example:54302

feinstring

Federal Employer Identification Number (US).

<= 10 characters

Example:12-3456789

taxIdSpainstring

Spanish Tax Identification Number (NIF/NIE). Mandatory per Lloyd’s coverholder reporting standard when insured has Spain exposure.

<= 9 characters

Example:A12345678

taxIdItalystring

Italian Tax Identification Number (Codice Fiscale). Mandatory per Lloyd’s coverholder reporting standard when insured has Italy exposure.

<= 16 characters

Example:RSSMRA85T10A562S

taxIdPortugalstring

Portuguese Tax Identification Number (NIF). Mandatory per Lloyd’s coverholder reporting standard when insured has Portugal exposure.

<= 9 characters

Example:123456789

canadianBusinessNumberstring

Canadian Business Number (BN). Required for any Canadian insured or where risk is located in Canada. Does NOT apply when a Canadian broker is involved in the placement.

<= 9 characters

Example:123456789RT0001

Example

SurplusBroker

object

Surplus and sub-producer details for US-origin risks. Required when risk premium originates from the United States. Note: surplusLinesBroker is the surplus lines broker entity — distinct from the main insurance producer in SubmissionRequest.producer.

typeOfAdmittedobject

Required (US-origin risks). US admitted classification — id only. Set to ‘Surplus’ for US surplus lines business. Source: fiscal/regulatory section of the slip.

* Additional properties are NOT allowed.
Show Child Parameters
surplusLinesBrokerobject

Required (US-origin risks). Surplus lines broker entity — id only. Search and match in XFI by broker name and address. If not found, request addition via the WNS leads process.

* Additional properties are NOT allowed.
Show Child Parameters
brokerLicensestring

Required (US-origin risks). Surplus lines broker licence number as stated on the slip. Query the broker directly if the licence number is missing.

Example:SL-CA-12345

slaNumberstring

Required when producerHomeState is New Jersey. NJ SLA Transaction Number. Format: {5-character SLA}-{YY}-{5-digit sequence} (e.g. ‘AB123-26-00001’).

Example:AB123-26-00001

producerHomeStateobject

Required (US-origin risks). State of filing (producer home state) — code only. Source: fiscal/regulatory section of the slip.

* Additional properties are NOT allowed.
Show Child Parameters
Example