SubmissionPolicy

object

Policy node. effectiveDate, expiryDate, currency, product, territory are mandatory.

effectiveDatestring(date)required

Required. Policy effective date (ISO 8601). Source: policy terms section of the slip.

Example:2024-01-01

expiryDatestring(date)required

Required. Policy expiry date (ISO 8601). Source: policy terms section of the slip.

Example:2025-01-01

currencyobjectrequired

Required. Currency reference — code only (e.g. USD, GBP, EUR).

* Additional properties are NOT allowed.
Show Child Parameters
productobjectrequired

Required. Product reference — id only.

* Additional properties are NOT allowed.
Show Child Parameters
territoryobjectrequired

Required. Territory reference — code only.

* Additional properties are NOT allowed.
Show Child Parameters
Example

SectionIdentifierRef

object

Section identifier, identified by id. Ids are fixed and stable across all environments.

* Additional properties are NOT allowed.
idstringrequired

1 = C&C, 2 = Non C&C.

Allowed values:12

Example:1

Example

ReferenceTypeRef

object

Reference type, identified by id. Ids are fixed and stable across all environments.

* Additional properties are NOT allowed.
idstringrequired

1 = EEA, 2 = Non-EEA, 3 = Both.

Allowed values:123

Example:1

Example

Section

object

A single section within a quote submission. The front end sends at most two section objects: one for the main Agency policy (MSSL/MAIS etc.), and one for the Mosaic Asta Europe (MAE) policy when the risk has an EEA component. Each section carries a division.id that identifies which agency line it belongs to. Trident uses this to determine which syndicate lines (1609/2610 for the agency section; 5399/5431 for the MAE section).

divisionobjectrequired

Required. Agency division this section belongs to — id only. Must match the division.id supplied in the corresponding lines[] entry. Trident uses this to identify: (a) which XFI agency line to associate the section with, and (b) which syndicate lines to include (agency div → 1609+2610; MAE div 7 → 5399+5431).

* Additional properties are NOT allowed.
Show Child Parameters
descriptionstring

Section label (e.g. ‘Cyber Liability - Primary Layer’). Use a descriptive name that identifies the layer type and coverage for internal reference.

Example:Cyber Liability - Primary Layer

gELRnumber(double)required

Required. gELR (gross expected loss ratio) at section level (numeric, e.g. 50). Source: quote/bind documentation.

Example:50

typeOfLayerobjectrequired

Required. Type of layer — id only. Select ‘Primary’ if Mosaic takes the first layer in the tower; select ‘1st Excess’ or higher for layers further up the tower. Default to ‘Primary’ if not specified by the underwriter. Source: quote email or documentation.

* Additional properties are NOT allowed.
Show Child Parameters
solvencyIIClassobjectrequired

Required. Solvency II class — id only. For CY LOB, select ‘EP - Direct-General Liability’. Enter the risk code applicable for the class of business.

* Additional properties are NOT allowed.
Show Child Parameters
typeOfLimitBasisobjectrequired

Required. Type of limit basis — id only. Source: quote email or documentation. Default to ‘In the Aggregate’ if not specified. Determines the basis and frequency at which the limit can be applied.

* Additional properties are NOT allowed.
Show Child Parameters
excessnumber(double)required

Required. Excess / attachment point for this section (numeric). Set to 0 for the Primary layer. Set to the attachment point value for Excess layers.

100%Limitnumber(double)required

Required. 100% limit for this section (numeric, gross pre-line). Source: quote documentation.

Example:1000000

aggregateLimitnumber(double)

Optional. Aggregate limit for this section (numeric, gross pre-line).

Example:1000000

agreementobjectrequired

Required. Agreement reference for this section. Identifies the binding authority agreement under which this section is written.

Show Child Parameters
coveragearray[object]required

Coverage line within a quote section.

Show Child Parameters
deductionarray[object]

Deduction (brokerage / commission) or tax deduction line within a quote section.

For tax deductions (deduction code TAXIDIR, TAXIRID, or TAXIRIR), populate the additional tax fields: amountOfPremium, typeOfTax, country, contactCreation. Record one entry per country in the tax schedule, including countries with 0% tax (use a Non-taxable entry).

Show Child Parameters
deductibleobject

Deductible details for this section.

Show Child Parameters
conditionsarray[object]

Clause / condition attached to a quote section.

Show Child Parameters
reinstatementsobject

Reinstatement config.

Show Child Parameters
regulatoryCodingarray[object]required

Regulatory coding (code split) line within a quote section.

Show Child Parameters
marketSplitarray[object]

A single carrier entry in a section-level market split.

Show Child Parameters
classobject

Bind-time. Section class — code only. Excess Casualty: XSC when policy reference suffix is AA; XCP (Punitive Damages) when suffix is AU.

* Additional properties are NOT allowed.
Show Child Parameters
riskAdjustedRateChangenumber(double)

Bind-time. Required for renewal policies. Risk Adjusted Rate Change percentage. Must not be 0% for renewals — query the underwriter if not provided. Source: quote/bind documentation.

Example:5

instalmentbasisobject

Optional. Instalment basis — id only (e.g. Annual, Quarterly, Monthly, Custom). Source: Premium Payment Terms section of the declaration slip. When set to Custom, also supply customInstalments, instalmentCount, and instalmentPlan.

* Additional properties are NOT allowed.
Show Child Parameters
customInstalmentsboolean

Optional. Set true for a custom (non-standard) instalment schedule. Depends on instalmentbasis — set true when instalmentbasis is Custom. When true: populate instalmentCount and instalmentPlan; set overrideToSingle to false.

overrideToSingleboolean

Bind-time. Override to a single instalment. Mutually exclusive with customInstalments — must be false when customInstalments is true.

instalmentCountinteger(int32)

Optional. Number of custom instalments. Depends on instalmentbasis — required when customInstalments is true (i.e. when instalmentbasis is Custom).

Example:4

paymentDaysinteger(int32)required

Required. Payment days from inception (typically 30 or 60 for MSSL).

Example:30

instalmentPlanarray[object]

A single entry in a custom instalment plan.

Show Child Parameters
Example

Line

object

A single agency policy line within a quote submission. Supply one element per underwriting agency line (one for the main Agency line; an additional one for the Mosaic Asta Europe agency line when the risk has an EEA component).

Front end supplies agency-line data only. Trident retrieves all XFI-created lines (agency + syndicate) via Get All Lines, identifies each by Division ID (Agency = front-end division.id; MAE = 7; 1609 = 3; 2610 = 12; 5399 = 6; 5431 = 13), and propagates most agency-line values to the syndicate lines (“Same as Agency Line”). Derived-only fields (originatingDivision, originatingOffice, global-risk cross-reference, inclusive-line) are computed by Trident and are not part of this payload.

Fields are grouped by stage: Submission → Quote → FON → Bind.

underWriterobject

Submission. Required. Underwriter with authority to write the risk — id only. Provided per agency line. Trident copies this to the syndicate lines. Source: underwriter’s email/document.

* Additional properties are NOT allowed.
Show Child Parameters
typeOfBillingobject

Submission. Required. Type of billing — id only (default ‘Producer billed’). Trident copies to syndicate lines.

* Additional properties are NOT allowed.
Show Child Parameters
divisionobject

Submission. Required. Agency division — id only. Identifies the Mosaic entity binding this agency line (e.g. MSSL, MAIS; MAE = 7). Trident matches this against XFI Get All Lines to locate the agency line. Do NOT confuse with the top-level shell division.

* Additional properties are NOT allowed.
Show Child Parameters
writtenLinenumber(double)

Submission. Required. Written line percentage for this agency line (a.k.a. Agency Share %). Default 100 if not supplied. XFI auto-generates actualWrittenLine% from this. Trident copies to syndicate lines.

Example:100

producingCompanyobject

Submission. Conditional. Producing company — id only. Required when division = Mosaic Asta Europe (7); set to the relevant Non-EEA agency division (e.g. MSSL, MAIS).

* Additional properties are NOT allowed.
Show Child Parameters
sBFClassobject

Submission. SBF (Syndicate Business Forecast) class — id only (default Cyber). Provided per agency line; Trident copies to syndicate lines.

* Additional properties are NOT allowed.
Show Child Parameters
producingUnderwriterobject

Quote. Producing underwriter for this line — id only. The underwriter who produced this line. Confirmed at bind by the stamp on the slip.

* Additional properties are NOT allowed.
Show Child Parameters
ourRoleobject

Quote. Required. Our role in the placement — id only. MAIS and Canada entities default to ‘Sole Lead’.

* Additional properties are NOT allowed.
Show Child Parameters
signedLinePercentagenumber(double)

Quote. Required. Signed line percentage for this line. At quote, signed line equals written line; at bind it may be reduced (never exceeds written line). Note: for PV MAIS, Excess Casualty and Energy Liability, Syndicate 2610/5431 written & signed line are always 0%.

Example:100

lloydsPlatformobject

Quote. Lloyd’s platform — id only. Set for MAE (Lloyd’s Brussels) and Singapore (Lloyd’s Asia) divisions; otherwise leave blank. Provided per agency line.

* Additional properties are NOT allowed.
Show Child Parameters
bureauLeadobject

Quote. Bureau lead — id only. E.g. ‘PV Portal’ for PV MAIS; otherwise usually blank. Provided per agency line (moved from UW Defaults).

* Additional properties are NOT allowed.
Show Child Parameters
isThirdPartyCapacityDeployedboolean

Quote. Third-party capacity deployed — default true (most Mosaic risks are routed through SCM). Agency/MAE lines: always checked. Trident leaves this BLANK on syndicate lines (1609/2610/5399/5431).

Example:true

syndicateCapitalManagementobject

Quote. Conditional. SCM broker partner — id only. Required when isThirdPartyCapacityDeployed = true. Default ‘Acrisure’ at quote; updated at bind per the SCM tracker. Trident leaves this BLANK on syndicate lines.

* Additional properties are NOT allowed.
Show Child Parameters
leadingInsurerobject

Quote/Bind. Conditional. Leading insurer — id only. Required when the slip leader is non-Lloyd’s. Source: Subscription Agreement section of the slip.

* Additional properties are NOT allowed.
Show Child Parameters
brokerOrderPercentnumber(double)

FON. Broker order percentage. Auto-calculated when written line and order are entered; updated on bind.

Example:50

signedOrderPercentnumber(double)

FON. Signed order percentage (SOP: always 100%). Kept in the API for simplicity.

Example:100

claimsAgreementPartyboolean

Bind. Required. Whether Mosaic is the claims agreement party. Set true when Mosaic is sole/bureau lead or a claims agreement party. Set false otherwise. 2610/5431 lines are always false. Source: Claims Agreement Party section of the slip.

Example:true

defenseCostsCoveredobject

Bind. Defense costs covered — id only. Required for PL LOB (processed per the Defense Cost section). Provided per agency line.

* Additional properties are NOT allowed.
Show Child Parameters
leaderPercentnumber(double)

Bind. Required when the slip leader is non-Lloyd’s. Leader percentage. Source: Subscription Agreement section of the slip.

Example:25

leaderReferencestring

Bind. Leader reference. Populated when the slip leader is non-Lloyd’s. Source: Subscription Agreement section of the slip.

Example:LDR-2026-001

actualDateWrittenstring(date)

Bind. Required. Date the underwriter agreed/stamped the slip. Found with the stamp on the slip.

Example:2026-07-01

dateSignedstring(date)

Bind. Required. Signed date as stamped on the slip. Trident copies to syndicate lines.

Example:2026-07-01

policyLineReferenceOverridestring

Bind. Required. Base syndicate policy line reference (a.k.a. Reference Override) supplied by the front end. Trident derives the agency and parallel-syndicate references from this: agency lines increment the trailing alphabetic character (…AA → AB); parallel syndicate lines (2610/5431) replace the trailing character with an incrementing numeral (…AA → A1).

Example:PWT3876925AA

Example